Small Wood Rib
The Wood Rib 50 mm is the small-yet-mighty tool for every studio. Reach into smaller openings and extend the walls of your vessel upward with the curved edge.
While the comfortable size sits nicely between your thumb and fingers, the novel diamond-grid design makes it easy to hold from any angle.
DESCRIPTION:
Beautifully oiled, carved wood rib
Approximately 50 mm wide, 70 mm long, and 13 mm deep
Laser-engraved DiamondCore Tools logo on front
Laser-engraved diamond-grid design on the back
Coated with a thin, smooth layer of wax
Smooth surfaces easily glide over wet clay
Wood grain may vary
USES/BENEFITS:
Opening the clay on the wheel after centering
Shaping and stabilizing wheel-thrown ceramics
Removing excess clay from a piece
Smooth surfaces easily glide over wet clay
Laser-engraved design enhances grip when wet
Wax coating protects wood when wet, preventing swelling or other damage
Laser-engraved designs enhance the grip surface when wet
The tapered side provides a scrapping edge for clearing surfaces
CARE:
Don’t leave the wood rib in water to soak for long periods
Occasionally apply wood oil to maintain a water-repellant surface
CAUTIONS:
Use all safety precautions
Keep out of the reach of children
The Wood Rib 50 mm is the small-yet-mighty tool for every studio. Reach into smaller openings and extend the walls of your vessel upward with the curved edge.
While the comfortable size sits nicely between your thumb and fingers, the novel diamond-grid design makes it easy to hold from any angle.
DESCRIPTION:
Beautifully oiled, carved wood rib
Approximately 50 mm wide, 70 mm long, and 13 mm deep
Laser-engraved DiamondCore Tools logo on front
Laser-engraved diamond-grid design on the back
Coated with a thin, smooth layer of wax
Smooth surfaces easily glide over wet clay
Wood grain may vary
USES/BENEFITS:
Opening the clay on the wheel after centering
Shaping and stabilizing wheel-thrown ceramics
Removing excess clay from a piece
Smooth surfaces easily glide over wet clay
Laser-engraved design enhances grip when wet
Wax coating protects wood when wet, preventing swelling or other damage
Laser-engraved designs enhance the grip surface when wet
The tapered side provides a scrapping edge for clearing surfaces
CARE:
Don’t leave the wood rib in water to soak for long periods
Occasionally apply wood oil to maintain a water-repellant surface
CAUTIONS:
Use all safety precautions
Keep out of the reach of children
The Wood Rib 50 mm is the small-yet-mighty tool for every studio. Reach into smaller openings and extend the walls of your vessel upward with the curved edge.
While the comfortable size sits nicely between your thumb and fingers, the novel diamond-grid design makes it easy to hold from any angle.
DESCRIPTION:
Beautifully oiled, carved wood rib
Approximately 50 mm wide, 70 mm long, and 13 mm deep
Laser-engraved DiamondCore Tools logo on front
Laser-engraved diamond-grid design on the back
Coated with a thin, smooth layer of wax
Smooth surfaces easily glide over wet clay
Wood grain may vary
USES/BENEFITS:
Opening the clay on the wheel after centering
Shaping and stabilizing wheel-thrown ceramics
Removing excess clay from a piece
Smooth surfaces easily glide over wet clay
Laser-engraved design enhances grip when wet
Wax coating protects wood when wet, preventing swelling or other damage
Laser-engraved designs enhance the grip surface when wet
The tapered side provides a scrapping edge for clearing surfaces
CARE:
Don’t leave the wood rib in water to soak for long periods
Occasionally apply wood oil to maintain a water-repellant surface
CAUTIONS:
Use all safety precautions
Keep out of the reach of children