Trapezoid Handheld Clay Extruder
The R1 Trapezoid Handheld Clay Extruder from DiamondCore® Tools was the first in our line of foot and handle-making tools. You can quickly create clean and beautiful accents for your ceramic pieces with the R1 Extruder.
DESCRIPTION:
Slices through a slab to make a trapezoid foot shape
Angled, stainless-steel blade leaves clean edges and pulls through clay effortlessly
4 3/8-inch (11 cm)-long hardwood handles
Great for feet, handles, and more
Adjustable-depth ski controls the thickness of the cut
Max approx. blade width 17 mm X height 19 mm
Min approx. blade width 16 mm X height 14 mm
Wood grain may vary
USES/BENEFITS:
Make feet for slab-built pieces
Ideal for hand-builders and useful for throwers
Consistent shape and adjustable thickness
So easy to use; avoid all that pulling
Works on a variety of clay types
Always-sharp stainless-steel blade won’t rust or shatter
A variety of basic and intricate shapes are available
CAUTIONS:
Not designed to be used with extremely wet or sticky clay
Use all safety precautions
Keep out of the reach of children
TIP:
For best results, use these foot and handle-making tools when the clay is not extremely wet or sticky. The clay tool blade should be clean and dry. Ideally, pull the extrusion up and out as it is being formed or fold back the sides of the slab so the extrusion pops up and out.
The R1 Trapezoid Handheld Clay Extruder from DiamondCore® Tools was the first in our line of foot and handle-making tools. You can quickly create clean and beautiful accents for your ceramic pieces with the R1 Extruder.
DESCRIPTION:
Slices through a slab to make a trapezoid foot shape
Angled, stainless-steel blade leaves clean edges and pulls through clay effortlessly
4 3/8-inch (11 cm)-long hardwood handles
Great for feet, handles, and more
Adjustable-depth ski controls the thickness of the cut
Max approx. blade width 17 mm X height 19 mm
Min approx. blade width 16 mm X height 14 mm
Wood grain may vary
USES/BENEFITS:
Make feet for slab-built pieces
Ideal for hand-builders and useful for throwers
Consistent shape and adjustable thickness
So easy to use; avoid all that pulling
Works on a variety of clay types
Always-sharp stainless-steel blade won’t rust or shatter
A variety of basic and intricate shapes are available
CAUTIONS:
Not designed to be used with extremely wet or sticky clay
Use all safety precautions
Keep out of the reach of children
TIP:
For best results, use these foot and handle-making tools when the clay is not extremely wet or sticky. The clay tool blade should be clean and dry. Ideally, pull the extrusion up and out as it is being formed or fold back the sides of the slab so the extrusion pops up and out.
The R1 Trapezoid Handheld Clay Extruder from DiamondCore® Tools was the first in our line of foot and handle-making tools. You can quickly create clean and beautiful accents for your ceramic pieces with the R1 Extruder.
DESCRIPTION:
Slices through a slab to make a trapezoid foot shape
Angled, stainless-steel blade leaves clean edges and pulls through clay effortlessly
4 3/8-inch (11 cm)-long hardwood handles
Great for feet, handles, and more
Adjustable-depth ski controls the thickness of the cut
Max approx. blade width 17 mm X height 19 mm
Min approx. blade width 16 mm X height 14 mm
Wood grain may vary
USES/BENEFITS:
Make feet for slab-built pieces
Ideal for hand-builders and useful for throwers
Consistent shape and adjustable thickness
So easy to use; avoid all that pulling
Works on a variety of clay types
Always-sharp stainless-steel blade won’t rust or shatter
A variety of basic and intricate shapes are available
CAUTIONS:
Not designed to be used with extremely wet or sticky clay
Use all safety precautions
Keep out of the reach of children
TIP:
For best results, use these foot and handle-making tools when the clay is not extremely wet or sticky. The clay tool blade should be clean and dry. Ideally, pull the extrusion up and out as it is being formed or fold back the sides of the slab so the extrusion pops up and out.